Product Description

Auria Premium Exterior Emulsion

Auria Premium Exterior Emulsion is an anti-bacterial, anti-fungal, dust free paint which is designed to withstand all weathers. Auria Premium Exterior Emulsion gives rich soft sheen finish which enhances the beauty of exterior surfaces. Auria Premium Exterior Emulsion provides extremely good protection against alkali and UV degradation thus ensuring that the shade does not fade for a long time and the paint durability lasts longer.

Thinning

Upto 50% to 60% by volume using water.

Coverage*

100-110 sq. ft./Itr/coat, when applied on smooth and non-absorbent surfaces. 

*Actual coverage may vary depending on method & condition of application, surface roughness & shade.

Shades Available 

1700+

Available Pack Size 

200 ml, 1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Recommended Usage

Auria Premium Exterior Emulsion is recommended for wall surfaces of all kinds of architectural buildings.

Post Application Instructions

For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.

Recommended Primer

Praise Premium Base Coat

(Use of Praise Premium Base Coat is mandatory to attain the specified life of the Auria Premium Exterior Emulsion.)

Directions For Use:

Surface Preparation: 

Remove all loose or poorly adhering materials by rubbing down using Sand Paper No.60/80/120 in phases and thereafter wipe clean. Ensure the surface is clean, dry, and free from all defective or poorly adhering material, dirt, grease, wax etc. Additional care of cleaning the walls needs to be taken in case of repainting. 

Recommended Undercoats: 

Primer: For Plastered surfaces – Tulsi Paints Praise Premium Base Coat. 

Putty: For Plastered surfaces – Tulsi Paints Cement Based / Polymer Putty. 

(Warranty valid only if recommended undercoats are used.) 

Application:

Apply a coat of Tulsi Paints Praise Premium Base Coat and allow the primer to dry for 6 - 8 hours. Apply two to three coats of the Tulsi Paints Auria Emulsion using brush, roller, or spray with dilution ratio of 1:0.6 with water. Keep an interval of 5-6 Hours between each coat. However, time interval depends on climatic conditions and dilution should always be done considering the brush ability and roller ability of the material. 

(Warranty valid only if applied as per given direction for use.)

Base 01, 10. 17, 20